Follow these instructions once your printer has arrived in the mail.
Inside the Box:
- Uncord printer device
- Power cord
- 57mm Thermal paper roll
- Plug the power cord into the back of the printer, then into an electrical outlet.
- Click the power toggle/button located on the right side of the printer to the "ON" position.
- Once powered on, the printer will initiate a self-check and search for the cellular network; indicated by the light in the located on the front blinking. This may take a few minutes depending on your location. Once the light on the front of the printer is a solid BLUE color, then it is ready to receive orders.
PLEASE NOTE: Make sure to place your device in a location where you can receive a cellular signal! Placing your printer in a location where the signal is weak (like a basement or underground locations) may stop your orders from coming in!